Things to Consider Before Buying a Table Saw

Posted by on Jun 2, 2015 in Buying Guide |

A table saw is probably one of the most important additions to a woodworker’s collection of tools. It is the foundation of one’s entire workshop. Buying the best table saw is paramount to a woodworker’s success. Here are some things to consider before making a purchase.


Knowing what you will use the table saw for will help determine what type of saw you need. There are four types of table saws on the market.

  • Cabinet Saws: These are typically the heaviest and most costly of all table saw types. Most are equipped with a cast iron table that is attached to a smooth surface. The motor is encased in a cabinet under the saw table. The motor is anywhere from 3HP – 5HP. The entire unit can weigh more than 600 pounds.
  • Contractor’s Saws: These are designed for portability and are a popular choice for building contractors who move from one job site to another. This is a much lighter saw than the cabinet saw. Motors are 1HP – 1 ¾ HP. This type of saw is for those who are more concerned with portability than accuracy or power.
  • Hybrid Saws: This is a combination of the cabinet saw and contractor saw. The combination of features can vary between manufacturers. Some incorporate heavy cast iron saw tables, while others use heavier gears and motors. Most are less than 2HP.


Regardless of the type of saw you choose, the following features should be considered:

  • Fence: A table saw’s fence needs to be both adjustable and accurate. A fence that slides or flexes when in use can cause dangerous kickbacks. Look for a fence that can be easily adjusted, to prevent injury and frustration.
  • Tilt: Most table saws have the bevel adjustment tilt the blade to the right, although some cabinet saw designs use a left tilt. This feature is mainly a matter of preference. Right tilt saws seem to be more readily available.
  • Dust Collection: Since all table saws create a lot of sawdust, having a quality dust collection system is an important component. It will help ensure that the saw runs more efficiently and will help to prolong the life of the saw. Most cabinet saws come equipped with a 4-inch dust collection system. Contractor saws are typically open at the bottom, allowing the sawdust to fall to the ground. Hybrids are somewhere in between.


Luckily, safety features have dramatically improved in recent years to help prevent catastrophic injuries. When choosing a table saw, look for these safety features:

  • Large, ‘hands-off’ paddle switch: This allows you to keep your hands on your work, while you turn the power off with your leg or knee.
  • Riving Knife: This prevents the cut pieces of wood from kicking back, a potentially dangerous situation.
  • Blade Guards: This removable plastic piece covers the saw blade, which helps prevent accidental contact with the blade.

Buying a table saw that is within your budget is crucial – but don’t choose based on price alone. Don’t skimp on important safety features, and choose a model with a well-built blade.

Check out this video for some more advices on buying a table saw:

Read More

My 3 Tips To Choose The Right Table Saw For Your Needs

Posted by on May 29, 2015 in Buying Guide |

 Craftsman-21833-Contractor-Table-Saw Every type of saw blade has its own purpose.The number of teeth,the hook angle,the gullet size and the tooth configuration determines what purpose the blade is intended for.

Number of teeth
The number of teeth present in a given blade determines it’s purpose ,the more number of teeth a blade has,the smoother and cleaner the cut will be,and blades with lesser number of teeth are designed for removing material faster.
A cross-cut blade is used for producing smooth cuts,and makes more individual cuts than a ripping blade.

The space in front of each tooth is called a gullet. The purpose of this space is for the chip removal during the cutting process.
A rip-blade has a much deeper gullet than compared to a cross-cut blade.

Tooth Configuration
The angle at which the saw blade tooth is positioned ,the shape of the teeth and the way through which the teeth is grouped all affects the cutting detail.

Blades are classified into four types:-
1) Flat top grinder (FTG)
The blades in the FTG are square shaped at the top which is termed as a “raker”,the blades are angled across the edge leaning to the adjacent blades.The tooth are shaped in such a way that it slices the wood in a proper manner .It is durable and fast,and functions more like a chisel. It gets the job done but doesn’t leave a smooth clean finish.They are used for almost all purposes.

2)Alternate Top Bevel (ATB)
In this type of blade ,the teeth is present in an alternative manner between a right and left bevel.This blade is ideal when it comes to cross cutting veneered plywood and natural woods.

3)Combination tooth51fBsAanwgL._SY300_
Blades with combination tooth are designed for both crosscutting as well as ripping.The blades consist of 4 alternate top bevels and 1 flat top grinder with a significantly large gullet in between the groups.Combination blades have gullets that are designed for both cross-cutting and ripping.

4)High Alternate Top Bevel (HI-ATB)
This type of blade is used for extra fine crosscutting and materials surfaced with melamine which are prone to chipping.
The notably high angle of the bevel increases the cutting action of the blade.

5)Triple Chip Grind (TCG)
In the triple chip grind blade,the teeth alternates between a “raking”tooth and a “trapeze” tooth .They are widely used for cutting hard wood and hard materials such as plastics,laminated counter tops and medium density fibreboard (MDF).

Read More